Flexibility of roof mounting Cut your costs All three-phase cooling units are suitable for a voltage range of 400/460 V and a frequency range of 50/60 Hz without rewiring. No need for expensive additional trans- formers. Flexible performance Just 3 mounting cut-outs for 6 different output catego- ries provide investment security and facilitate easy adap- tation of the cooling output to the ambient conditions and the installed heat loss. Rittal platform strategy TopTherm air/water heat exchangers and roof-mounted fans are also compatible with the mounting cut-outs. Optimum flow conditions Targeted air routing inside the enclosure The internal air circulation is targeted and effective: The heated air is extracted centrally. Chilled air is dis- charged via up to four spigots positioned in the corners of the base plate and may be routed in a controlled man- ner into the lower enclosure chamber via the optional ducting system. The result is highly effective cooling and the avoidance of air short-circuits. The targeted air circu- lation inside the enclosure via ducts also prevents the creation of hot-spots. Integrated Electrical condensate evaporation Condensate arising inside the enclosure or on the eva- porator coil of the cooling unit is effectively evaporated. The evaporator device inside the cooling units has a very high evaporation output (several litres per day). This is achieved thanks to the principle of direct evaporation. RiNano coating The standard nano-surface finish on condenser coil fins ensures a more constant cooling output over time and eliminates the need for filter media in many areas. Technical System Catalogue/Climate control 3 - 32
Technical System Catalogue Climate Control
To see the actual publication please follow the link above