CMC III Processing Unit - System overview
Catalogue 2014/2015
CMC III Processing Unit
Mini USB:
Programming cable 7030.080 is required for
programming, see page 457
Internal infrared access sensor
SD card insert:
for data logging
CMC III Processing Unit
Voltage supply 24 V (DC) and redundant
voltage supply 24 V (DC)
Power packs, see page 457
Alarm relay output:
Changeover contact for safety extra-low
voltage
Ethernet 10/100 BaseT RJ 45 with PoE:
Ethernet interface to IEEE 802.3
via 10/100 BaseT full duplex 10/100 Mbit/s
RJ 12/RS232 accessory modules:
Display unit, ISDN unit, GSM unit
External temperature sensor
(included in the supply of PU)
USB master for data logging and update
Two integral digital inputs
Up to 16 CAN bus systems
are supported1)
CMC III CAN bus unit
– +
CAN bus 1
CMC III sensors
for direct connection
CMC III
CAN bus
sensor
as adaptor for
CMC II
sensors
CMC III CAN bus
access
with integral
IR access sensor
Up to 16 CAN bus systems
are supported1)
CAN bus 2
1) Depending on power
supply/connection
combinations,
see page 451
Control units
CMC III I/O unit CMC III power unit
2 1
0°
System overview
Contains
1
8 digital inputs
2
and 4 relay outputs
Functions:
– Switching and measuring
voltage, current, power
and work
– With two outputs
– Also for the activation of
fans
24 V (DC)2)
Interfaces unit for connecting
CMC II accessories
Connection for other
products,
see page 452
2) External 24 V (DC) supply
via 7030.060 required
Model No.
CMC III
I/O unit 7030.040
Model No.
CMC III
Power unit 7030.050
Model No.
CMC III
CAN bus unit 7030.030
Rittal Catalogue 34/IT infrastructure 449
- Catalogue 2014 /2015
- Index
- Enclosures
- Enclosure expertise
- Small enclosures
- Polycarbonate enclosures PK
- without knockouts
- without knockouts
- with knockouts
- Accessories
- Mounting plate
- Hinges
- Wall mounting brackets
- Cast aluminium enclosures GA
- Accessories
- Mounting plate
- Wall mounting bracket
- Hinge, exterior
- Terminal boxes KL
- without gland plate
- without gland plate
- with gland plate
- with gland plate
- E-Box EB
- Depth 80 mm
- Depth 120 mm
- Depth 155 mm
- Bus enclosures BG
- Compact enclosures
- Compact enclosures AE
- Features
- Order information
- Compact system enclosures CM
- Width 600 – 800 mm
- Width 1000 – 1200 mm
- Plastic enclosures KS
- Enclosure systems
- TS 8/SE 8 Features
- Baying systems TS 8
- Height 1200/1400 mm, depth 500 mm
- Height 1600 mm, depth 500 mm
- Height 1800 mm, depth 400 mm
- Height 1800 mm, depth 500 mm
- Height 1800 mm, depth 600 mm
- Height 2000 mm, depth 400 mm
- Height 2000 mm, depth 500 mm
- Height 2000 mm, depth 600 mm
- Height 2000 mm, depth 800 mm
- Height 2200 mm, depth 600 mm
- Electronic enclosures
- IP 66/NEMA 4
- Distribution enclosures
- Modular enclosures, height 2000 mm
- Modular enclosures, height 2200 mm
- Fuse-switch-disconnector enclosures
- Busbar enclosures
- EMC enclosures
- System enclosures SE 8
- Width 600 – 800 mm
- Width 1000 – 1800 mm
- IP 66/NEMA 4
- IT enclosure systems/housings
- Network/server enclosures TS-IT
- Features
- Order information
- with vented door for room climate control
- with vented door for room climate control
- with glazed door for rack climate control
- with glazed door for rack climate control
- with glazed door for rack climate control, pre-configured
- with glazed door for rack climate control, IP 55
- Distributor racks
- Data Rack
- IT enclosures
- VerticalBox
- FlatBox
- Design with 482.6 mm (19") mounting angles
- Design with 482.6 mm (19") mounting frame
- Wall-mounted enclosures EL, 3-part
- pre-configured with mounting angles, depth-variable
- with punched rails and mounting angles, depth-variable
- with mounting plate and mounting angles, static installation
- with mounting plate and mounting angles, static installation
- Wall-mounted enclosures AE
- with 482.6 mm (19") mounting angles, depth-variable
- Small fibre-optic distributors
- with mounting plate and splicing cassette accommodation
- Console systems/PC enclosure systems/Industrial Workstations
- TopConsole system TP
- Combination options
- 600 mm wide
- 800 mm wide
- 1200 mm wide
- 1600 mm wide
- Accessories
- Trim panel
- TP aluminium strip
- Drawer
- Desk section
- One-piece consoles TP
- Universal consoles TP
- PC enclosure systems
- Enclosure for tower PC
- Industrial Workstations
- Combination options
- IW enclosures and worktops
- Operating housings/support arm/stand systems
- Comfort Panel
- Configuration examples
- Optipanel
- Configuration examples
- Operating housing with handle strips
- Features
- Order information
- Operating housing for desktop TFT up to 24"
- Compact Panel
- Support arm systems
- Support arm system CP 40, steel
- Support section CP 40, steel
- Tilting adaptor +100/-60° for support arm connection ▭ 120 x 65 mm/▭ 90 x 71 mm
- Attachment CP 40, steel, for support arm connection ▭ 90 x 71 mm
- Coupling CP 40, steel, for support arm connection ▭ 90 x 71 mm
- Coupling CP 40, steel, for support arm connection ▭ 120 x 65 mm
- Connection console VESA 75/100 for support arm connection ▭ 120 x 65 mm
- Angle coupling 90° CP 40, steel, for support arm connection ▭ 90 x 71 mm
- Support section CP 40, steel
- Angle piece 90° CP 40, steel
- Top-mounted joint CP 40, steel
- Wall-mounted hinge CP 40, steel
- Wall/base mounting bracket, CP 40, steel
- Mounting component CP 40, steel, for signal pillar
- Accessories
- Support arm system CP 40, stainless steel
- Support section CP 40, stainless steel
- Tilting adaptor 10° CP 40, stainless steel
- Mounting bracket CP 40, stainless steel
- Coupling CP 40, stainless steel
- Support section CP 40, stainless steel
- Angle piece 90° CP 40, stainless steel
- Wall/base mounting bracket, rigid, CP 40, stainless steel
- Wall/base mounting bracket, swivel, CP 40, stainless steel
- Wall console CP 40, stainless steel
- Support arm system CP 60/120/180
- Support arm system CP 60
- Support section CP 60
- Tilting adaptor 10° for support arm connection
- Tilting adaptor +/-45°/tilting adaptor +100°/-60° for support arm connection
- Connection console VESA 75/100 for support arm connection
- Attachment CP 60/40 for support arm connection
- Coupling CP 60/40 for support arm connection
- Angle coupling 90° CP 60/40 for support arm connection
- Support section CP 60/40
- Angle adaptor 90° for support arm combination CP 60/40
- Angle piece 90°, CP 60
- Intermediate hinge CP 60
- Top-mounted joint CP 60
- Wall-mounted hinge CP 60
- Wall/base mounting bracket CP 60, small
- Wall/base mounting bracket CP 60, large
- Mounting component CP 60 for signal pillar
- Accessories
- Support arm system CP 120
- Support section CP 120
- Adaptor CP 120/60 from support arm connection Ø 130 mm to ▭ 120 x 65 mm
- Attachment CP 120/60 for support arm connection
- Coupling CP 120/60 for support arm connection
- Angle coupling 90° CP 120 for support arm connection
- Support section CP 120/60
- Adaptor for support arm combination CP 120/60
- Angle piece 90°, CP 120
- Intermediate hinge CP 120
- Top-mounted joint CP 120
- Wall-mounted hinge CP 120
- Wall/base mounting bracket CP 120, small
- Wall/base mounting bracket CP 120, large
- Mounting component CP 120/180 for signal pillar
- Tilting adaptor
- Accessories
- Support arm system CP 180
- Support section CP 180
- Attachment CP 120 for support arm connection Ø 130 mm
- Coupling CP 120 for support arm connection Ø 130 mm
- Support section CP 180/120
- Adaptor for support arm combination CP 180/120
- Angle piece 90° CP 180
- Intermediate hinge CP 180
- Top-mounted joint CP 180
- Wall-mounted hinge CP 180
- Wall/base mounting bracket CP 180, small
- Mounting component CP 120/180 for signal pillar
- Support arm system CP 40/60/120/180
- Connection console VESA 75/100
- Connection console
- Adaptor
- Adaptor
- Adaptor
- Connection plates
- Angle adaptor 90°
- Adaptor
- Adaptor CP 120 to support arm, height-adjustable
- Support arm, height adjustable
- Housing coupling
- Pivot
- Tilting adaptor +/–45°
- Tilting adaptor +100°/–60°
- Stand systems
- Pedestal, modular
- Pedestal, complete
- Pedestal, open/pillar, small
- Accessories
- Base mounting bracket
- Trim panel
- Enclosure reinforcement
- Hygienic Design
- Terminal boxes HD
- Compact enclosures HD
- Accessories
- Levelling feet HD
- Wall spacer bracket HD
- Enclosure key HD
- Bit HD
- Cam lock HD
- Rails for interior installation
- Stainless steel
- Switch housings
- Terminal boxes KL
- Bus enclosures BG
- Compact enclosures AE
- Compact enclosures AE
- Compact enclosures AE
- Baying systems TS 8
- IP 66/NEMA 4X
- System enclosures SE 8
- IP 66/NEMA 4X
- One-piece consoles
- PC enclosure systems
- Premium Panel IP 69K
- Command panel housings with door
- Ex enclosures
- Stainless steel, empty enclosure with screw-fastened cover
- Stainless steel, empty enclosure with hinged door
- Plastic, empty enclosure with hinged door
- Power distribution
- Power distribution expertise
- Busbar systems
- Mini-PLS
- Mini-PLS busbar system (40 mm)
- Mini-PLS fuse elements
- Mini-PLS component adaptor
- Rated current max. 12 – 25 A
- Rated current max. 40 – 100 A
- Allocation of switchgear – Mini-PLS component adaptors 12 A/25 A
- Allocation of switchgear – Mini-PLS component adaptors 40 A/100 A
- RiLine
- RiLine shrouded busbar systems up to 800 A (60 mm)
- Flat copper bar system
- Flat copper bar system
- RiLine shrouded busbar systems 800 A/1600 A (60 mm)
- PLS busbar system
- PLS busbar system
- Connection adaptors
- Rated current max. 63 – 125 A
- Rated current max. 250 – 600 A
- Rated current max. 800 – 1600 A
- Connection adaptor expansion set
- for 4-pole configuration
- OM adaptors
- Rated current max. 16 – 25 A, with connection cables
- Rated current max. 32 A, with connection cables
- Rated current max. 40 A, with connection cables
- Rated current max. 65 A, with connection cables
- Rated current max. 32 A, with tension spring clamp
- Rated current max. 65 A, with tension spring clamp
- Rated current max. 25 A, with plug-in cable outlet
- OM supports
- without contact system
- Circuit-breaker component adaptors
- Rated current max. 100 – 125 A, 3-pole
- Rated current max. 160 – 250 A, 3-pole
- Rated current max. 400 – 630 A, 3-pole
- Rated current max. 160 – 250 A, 4-pole
- Rated current max. 500 A, 4-pole
- OM adaptor with connection cables
- Allocation of switchgear
- Allocation of switchgear
- OM adaptor with tension spring clamps
- Allocation of switchgear
- Allocation of switchgear
- Bus-mounting fuse bases
- Bus-mounting fuse base D-Switch
- NH fuse-switch disconnectors, size 000
- Size 000, for mounting plate assembly
- Size 000
- NH fuse-switch disconnectors, size 00 to 3
- Size 00
- Size 1
- Size 2 – 3
- Size 00, with electronic fuse monitoring
- Size 1, with electronic fuse monitoring
- Size 2 – 3, with electronic fuse monitoring
- Size 00, with electromechanical fuse monitoring
- Size 1, with electromechanical fuse monitoring
- Size 2 – 3, with electromechanical fuse monitoring
- NH slimline fuse-switch disconnectors, size 00 to 3
- Size 00
- Size 00 – 3
- Size 00 – 3, with electronic fuse monitoring
- Fuse holder
- Rated operating current max. 30 – 60 A
- Rated operating current max. 100 – 400 A
- RiLine accessories
- Busbar supports/base isolators
- Busbar support
- Base isolators
- Spacers
- Busbars
- CUPONAL busbars
- Busbars E-Cu
- Busbar cover sections
- Inserted screw nuts M12
- PLS special busbars E-Cu
- Busbar connectors
- PLS busbar connectors
- PLS expansion connector
- Laminated copper bars
- Universal support
- Universal support
- Contact hazard protection
- System components
- Support panels
- Cross members
- Connection system
- Conductor connection clamps
- Plate clamps
- System covers
- Connection system/Mini-PLS component adaptors
- Connection block
- Insert strips
- Support rails 35 x 7.5 mm
- for OM adaptor/support
- Support rails 35 x 10 mm
- Support rails 35 x 15 mm
- Support rails 35 x 7.5 mm
- Insert strips
- Connection pin
- PinBlock
- PinBlock Plus
- Cable set
- Twin cords
- for circuit-breaker component adaptors
- Insert strips
- Sliding blocks
- Connection bracket
- Support rails 35 x 15 mm
- for bus-mounting fuse bases
- Contact hazard protection covers
- Covers, side
- Connection space extenders, side
- for NH fuse-switch disconn./NH slimline fuse-switch disconn.
- Box terminals
- Connection space covers
- Arc chambers
- Micro-switch
- for NH slimline fuse-switch disconnectors
- Connection space cover
- Clamp-type terminal connection
- Box terminals
- Busbar terminals
- Current converter
- Cable ties
- Ri4Power
- Busbar systems Maxi-PLS
- System components
- System components
- System components
- Busbar systems Flat-PLS
- System components
- System components
- System components
- Connection components for Maxi-PLS/Flat-PLS
- For open air circuit-breakers and busbar connections
- For open air circuit-breakers and busbar connections
- For open air circuit-breakers and busbar connections
- For open air circuit-breakers and busbar connections
- Busbar systems (100/185/150 mm)
- Busbar systems up to 1250 A (100 mm), 1600 A (185 mm), 2500 A (150 mm), 3000 A (150 mm)
- Connector kits for Maxi-PLS/Flat-PLS
- System accessories
- Screw connections
- Stacking insulator
- Support rails
- Stabiliser
- Cover systems
- Form 1
- Device module
- Contact hazard protection cover
- Contact hazard protection cover
- Mounting bracket
- Blanking covers
- Compartment configuration
- Form 1-4
- Compartment side panel modules
- Compartment side panel modules
- Gland plates
- Terminal box Form 4b
- Compartment divider
- Compartment divider
- Compartment divider
- Gland plates
- Air circuit-breaker support rails
- Mounting bracket
- Mounting bracket
- Mounting kit
- Partial mounting plates
- Support frame
- Coupling set mounting kit
- Ri4Power accessories
- Busbar system
- System attachments
- Distribution busbars
- Spacer rolls
- Fuse-switch disconnector section
- Front trim panels
- Assembly kit
- Divider panels
- Dividing plates
- Contact hazard protection cover
- Cover
- Punched rail
- Cover
- Busbar support
- End support
- Distribution busbars
- Terminal block
- Software/documentation
- Rittal Power Engineering
- Assembly instructions for Ri4Power low-voltage switchgear
- Ri4Power ISV distribution enclosures
- Mounting kits
- Mounting kits
- Mounting kits
- Installation modules
- Contact hazard protection modules
- Mounting plate modules
- Support rail modules
- DIN rail mounted device modules
- Connection terminal blocks
- NH fuse-switch disconnector modules
- Disconnector cross-member
- NH slimline fuse-switch- disconnector modules
- Air circuit-breaker modules
- Meter mounting board module
- Busbar modules N/PE
- Busbar modules
- Accessories
- Cover strips
- Blanking cover
- Blanking cover
- Wiring brackets
- Depth extension frame
- Cross rails
- Mounting angles
- Mounting angles
- Depth stay
- Equipment support connector
- Climate control
- Experts in climate control
- Cooling with ambient air
- TopTherm fan-and-filter units
- Air throughput 20 – 55 m³/h
- Air throughput 105 – 180 m³/h
- Air throughput 230 – 550 m³/h
- Air throughput 700 m³/h
- Air throughput 55 – 230 m³/h, with EC technology
- Air throughput 550 – 900 m³/h, with EC technology
- Air throughput 20 – 180 m³/h, EMC
- Air throughput 230 – 900 m³/h, EMC
- Air throughput and protection category
- TopTherm fan-and-filter units
- TopTherm fan-and-filter units with EC technology
- TopTherm fan-and-filter units, EMC
- TopTherm roof-mounted fans
- Air throughput 400 – 800 m³/h
- Roof-mounted fans, roof ventilation
- Air throughput 360 m³/h
- Rack-mounted fans for 482.6 mm (19")
- Air throughput 320 – 480 m³/h
- Vario rack-mounted fans for 482.6 mm (19")
- Air throughput 320 – 480 m³/h
- Tangential fans for 482.6 mm (19")
- Air throughput 320 m³/h
- TopTherm air/air heat exchangers
- Specific thermal output 17.5 – 90 W/K, wall-mounted with controller
- Air/air heat exchangers
- Specific thermal output 66 W/K, roof-mounted
- Cooling units
- Thermoelectric coolers
- Total cooling output/heating output 100 W
- TopTherm wall-mounted cooling units, horizontal format
- Output class 300 W
- TopTherm wall-mounted cooling units
- Output class 300 W
- TopTherm wall-mounted cooling units "Blue e"
- Output class 500 W
- Output class 750 W
- Output class 1000 W
- Output class 1500 W
- Output class 2000 W
- Output class 2500 W
- Output class 4000 W
- TopTherm wall-mounted cooling units "Blue e", slimline
- Output class 1500 W
- TopTherm wall-mounted cooling units "Blue e", NEMA 4X
- Output class 500 – 1500 W
- Output class 2000 – 2500 W
- TopTherm roof-mounted cooling units "Blue e"
- Output class 500 W
- Output class 750 W
- Output class 1000 W
- Output class 1100 – 1500 W
- Output class 2000 W
- Output class 3000 – 4000 W
- Modular climate control concept - Cooling module "Blue e"
- Output class 1500 – 2500 W
- Modular climate control concept - Section doors
- for installing cooling modules
- Cooling with water
- Air/water heat exchangers
- Output class 300 – 500 W, wall-mounted
- Output class 600 – 1000 W, wall-mounted
- Output class 1250 – 3000 W, wall-mounted
- Output class 3000 – 5000 W, wall-mounted
- Output class 7000 W, wall-mounted
- Output class 1875 – 4000 W, roof-mounted
- Liquid Cooling Package
- Output class 10 kW, LCP Rack Industry
- TopTherm chillers
- Output class 1000 – 1500 W
- Output class 3000 – 6000 W
- Output class 1000 – 2500 W, wall-mounted
- Output class 8000 – 16000 W
- Output class 20000 – 40000 W
- Enclosure heaters
- Continuous thermal output 235 – 800 W, with fan
- Continuous thermal output 10 – 150 W, without fan
- Climate control accessories
- Filter technology
- Filter mats
- Filter mats
- Metal filter
- Spare filter mats
- Fine filter mats
- Outlet filter
- Hose-proof hood
- Blanking cover
- Front outlet grille 2 U
- Filter holder
- Enclosure internal fans
- Mini-fan
- Integrated louvres
- Air routing
- Air duct system
- Air duct adaptor
- Deflector, 90°
- Flat air duct system
- Flat duct extension
- Stoppers
- Air diverter
- Water distribution
- Electric condensate evaporator
- Condensate collecting bottle
- Condensate hose
- Flow regulator valve
- Fitting G⅜˝
- Cooling medium
- Control/regulation
- Digital enclosure internal temperature display and thermostat
- Digital enclosure internal temperature display and thermostat
- Enclosure internal thermostat
- Hygrostat
- Bottom-mounted adaptor
- Speed control EC
- Speed control EC
- Speed control
- Interface board
- SK BUS system
- SK BUS system
- Toroidal transformer
- Mounting
- Roof plates TS
- Vent attachment TS
- Trim frame
- Quick-change frame
- Guide frame
- Project planning/monitoring
- Therm software
- RiDiag II
- IT infrastructure
- IT infrastructure expertise
- RiMatrix S
- RiMatrix S at a glance
- Standard room
- Standard security room
- Standard container
- RiMatrix S Selector
- RiMatrix S App
- IT enclosure systems/housings
- IT power
- Power Distribution Rack
- Power Distribution Rack PDR
- Power Distribution Module PDM
- Power System Module
- PSM busbars
- PSM busbars + PSM socket modules
- PSM busbars
- PSM measurement bar
- PSM measurement bar for CMC III
- PSM socket modules
- PSM socket modules
- PCU Power Control Unit
- Power Control Unit (PCU)
- Accessories
- Mounting kit
- Connection cable
- Cable lock PSM
- Overvoltage protection PSM
- Power Distribution Unit
- Features
- Order information
- PDU international, basic version
- PDU international, metered version
- PDU international, switched version
- PDU international, managed version
- Slave PDU international, managed version
- PDU UK, basic version
- PDU UK, metered version
- PDU UK, switched version
- PDU UK, managed version
- Slave PDU UK, managed version
- PDU accessories
- CMC III sensors (max. 4 sensors per PDU)
- Configuration
- Sample applications
- Power System Module
- MID measurement module for CMC III
- Power supply
- Socket strips
- Socket strips
- Socket strip
- Socket strip
- Junction box
- Socket
- Service socket
- Energy-Box, 3 U, 482.6 mm (19˝)
- Energy-Box, 3 U, 482.6 mm (19˝)
- IT cooling
- Liquid Cooling Package
- LCP Rack CW
- LCP Inline CW
- LCP T3+ CW
- LCP Rack DX
- LCP Inline DX
- Accessories for LCP CW/DX
- Touchscreen display
- Condenser unit
- Vertical shielding
- Connection hose
- Rear adaptor
- Add-on cover
- SNMP card
- Fan module
- Aisle containment
- Roof-mounted cooling units
- for cooling IT equipment
- Small cooling units
- Roof-mounted fans
- Fan mounting plate
- Fan mounting plate
- Fan expansion kit
- Fan cross member
- Fan expansion kit
- Cover plates for fan panels
- Vent cover
- Chillers for IT cooling
- Total cooling output 15 – 67 kW
- Total cooling output 77 – 124 kW
- Total cooling output 155 – 261 kW
- Total cooling output 291 – 481 kW
- IT monitoring
- CMC III – Monitoring system
- CMC III Processing Unit Compact
- System overview
- CMC III Processing Unit
- System overview
- CMC III Processing Unit/Compact
- Sensors/accessories
- Control units for CMC III Processing Unit
- CMC III sensors for direct connection
- Interface for CMC II sensors
- Accessories
- Access system
- Interface for PSM, PCU
- PSM and slave PDU for direct connection
- CMC III control units/ CMC III sensors
- Interface for CMC III sensors
- Access system
- Interface for PSM, PCU
- Power supply unit
- Programming cable
- CAN bus connection cable
- Connection cable/extension
- Extension cable RJ 12
- Mounting unit, 1 U
- Cable clamp strap
- Mounting unit
- Door control system
- Door control system
- Accessories
- Door control module
- Door kit
- Door comfort handle
- Door switch
- Monitor/keyboard unit
- Monitor/keyboard unit, 1 U
- KVM switch
- Dynamic Rack Control
- Accessories
- RFID aerial
- RFID tags
- RFID controller
- CMC III CAN bus DRC
- IT management software
- RiZone Appliance Standard
- RiZone Appliance IP node licence
- Server shutdown software
- IT security solutions
- Micro Data Centre
- Level E
- Level B
- Level A
- Compact split cooling solution
- Outdoor split cooling solution
- Split outdoor cooling solution with inverter technology
- Data Centre Container
- Fire alarm and extinguisher system DET-AC/EFD Plus
- Security rooms
- Software & services
- next level for industry
- Planning and project management
- Design – Calculation – Verification
- System technology and components
- Virtual enclosure layout
- Enclosure machining
- Documentation
- Benefits of the value chain
- Tools/CAD data
- RiCAD 3D
- AE Laser Express
- Therm software
- Rittal Power Engineering
- Configurators
- Enclosures
- TS 8 configurator
- CM configurator
- Human/machine interface
- Command panel configurators
- Support arm configurator
- IT management software
- DCIM – Data Center Infrastructure Management
- Service – Global availability
- Services
- Quality management
- System accessories
- Flex-Block base/plinth system
- Base/plinth
- Flex-Block base/plinth system
- Flex-Block corner pieces
- Flex-Block trim panels
- Baying clip
- Base/plinth TS
- Base/plinth components front and rear
- Base/plinth trim panels, side
- Base/plinth baying brackets
- Cable chamber
- Side panels
- Transport castors
- Base mounting plate
- Fastening bolts
- Levelling component
- Cover cap
- Base/plinth, stationary
- Filter mat
- Base/plinth components front and rear
- Base/plinth trim panels, side
- Base/plinth trim, modular
- Base/plinth
- Base/plinth, complete
- Base/plinth, complete
- Cast feet
- Levelling feet
- Cross member
- Stabiliser
- Base
- Base
- Levelling feet
- Levelling feet
- Levelling feet
- Twin castors
- Transport kit
- Adaptor sleeve
- Base/plinth adaptor
- Base/plinth adaptor
- Width divider
- Reinforcement bracket
- Base mount
- Clips
- Gland plate
- For enclosure depth 300 mm, complete module groups
- For enclosure depth 400 mm, complete module groups
- For enclosure depth 500 mm, complete module groups
- For enclosure depth 600 mm
- For enclosure depth 800 mm
- For enclosure depth 1000 mm
- For enclosure depth 1200 mm
- Trim panel
- Gland plate module, vented
- Gland plate module, one-piece, with brush strip
- Gland plate module, two-piece, with brush strip
- Gland plate module for side cable entry
- Pressure relief stoppers
- Condensate discharge
- Walls
- Side panels
- Side panels, screw-fastened, sheet steel
- Side panels, screw-fastened, stainless steel
- Baying frame, IP 66/NEMA 4, NEMA 4X
- Enclosure panel holders, internal
- Hinges
- Side panel, divided
- Side panel, lockable
- Internal latch
- Paint
- Divider panels/partitions
- Divider panel
- Partition
- Divider panel
- Module plates
- Adaptor
- Cover plate
- Cover with door
- Isolator door locking
- TS isolator door cover (US version)
- Door latch for bayed enclosure suites
- Baying system
- Enclosure suites
- Quick-fit baying clamp, one-piece
- Quick-fit baying clamp, three-piece
- Baying clamp, horizontal
- Baying clamp, vertical
- Baying clamp, vertical
- Baying connector, external
- Angular baying bracket
- Baying brackets
- Angular baying brackets
- Combination angle
- Baying attachment, vertical
- Baying attachment, vertical
- Baying cover, vertical
- Baying clamp, horizontal
- Baying cover, top
- Baying connector, external
- Baying kit
- Doors/locks
- Door variants
- Tubular door frame
- Glazed door
- Handle adaptor
- Lock components
- Glazed door, vented
- Lockable and adjacent door
- Protective bars
- Holder
- Variable modular climate control concept
- Installation accessories for modular front design TS
- Partial doors
- Perforated mounting strips
- Front trim panels, top
- Front trim panels, bottom
- Trim panel, hinged at the top
- Drawer
- Stay
- Upgrade kit IP 4X
- Wiring trim panel
- Viewing panels/operating panels
- System window
- Viewing window
- Horizontally hinged FT stay
- Acrylic glazed cover
- Viewing window
- Monitor frame
- Identification strips
- Operating panel
- Cam lock
- Viewing window
- Allocation of lock systems
- Compact enclosures, sheet steel
- Large enclosures, sheet steel
- Console systems and industrial workstation, sheet steel
- Enclosures and cases, stainless steel
- Lock systems
- Comfort handle
- Lock inserts
- Folding lever handle
- Comfort handle
- Adjacent door latch
- Locking bar latch to CNOMO¹⁾
- Spring washer
- Mini-comfort handle
- Ergoform S lock system
- Plastic handles
- T-handles
- Cam locks
- Lock inserts
- Lock cylinder inserts
- Semi-cylinder lock
- Lock cover
- Multiple lock
- Lock cover
- Security lock
- Enclosure keys
- Hinges
- 130°/180° hinges
- Hinge pin removal tool
- Cover hinge
- Cover retainer
- Door, internal
- Support strips
- Spacers
- Perforated mounting strip
- Utility lectern
- Wiring plan lectern
- CD/DVD box
- Plastic wiring plan pockets
- Plastic wiring plan pockets
- Wiring plan pockets with transparent pouch
- Sheet steel wiring plan pockets
- Door stay
- Door stay for escape routes
- Ride-up roller
- Transport and mounting handle
- Document clip, magnetic
- Alternate frame, magnetic
- Roof/wall mounting
- Roof
- Rain canopies
- Dust guard trim
- Dust guard trim
- Top-mounting module
- Side panel
- Roof plates
- Cable entry gland
- Roof plate
- Roof plate, vented
- Roof mounting screw
- Spacers
- Eyebolts
- Eyebolts
- Eyebolts
- Wall mounting
- Wall mounting bracket
- Wall mounting bracket
- Wall mounting bracket
- Wall mounting bracket
- Wall angle
- Wall bracket
- Pole clamp
- Enclosure connectors
- Frame connector, adjustable
- Wall mounting bracket
- Interior installation
- Mounting plates
- Mounting plates
- Mounting plate
- Mounting plate infill
- Mounting plate attachment
- Mounting plate attachment
- Installation kit
- Slide rails
- Mounting plate adjustment bracket
- Mounting plate attachment
- Cross-brace for mounting plates
- Transport handles for mounting plates
- Partial mounting plates
- Hinge attachment
- Partial mounting plates, locatable into rails
- Rail systems
- Installation examples
- AE installation examples with TS system rails
- CM installation examples with TS system rails
- TP pedestal/one-piece console Installation examples with TS system rails
- TP console Installation examples with TS system rails
- TS/SE installation examples with TS system rails
- TS/SE installation examples with TS system rails
- TS/SE installation examples with TS system rails
- Rails for interior installation
- Rails for interior installation
- TS punched section with mounting flange, 17 x 73 mm
- Attachment TS
- TS punched section with mounting flange, 17 x 73 mm
- TS punched section with mounting flange, 23 x 73 mm
- TS punched sections without mounting flanges 45 x 88 mm
- TS punched rail 25 x 38 mm
- Base configuration rail
- TS punched rail 18 x 38 mm
- TS support strips
- TS assembly block
- Adaptor rail
- PS punched rails 23 x 23 mm
- Punched rail 23 x 23 mm
- PS punched section without mounting flange 23 x 73 mm
- PS punched section with mounting flange, 23 x 73 mm
- C rails 30/15
- C rails
- System support rails
- Support rails
- Support rail 65 x 42 mm
- Support rails TS 35/15
- Support rails TS 35/7.5 and TS 35/15
- Support rails
- Mounting clip
- TS punched rail 17 x 17 mm
- C rails
- Punched sections with mounting flanges
- Mounting plates
- Mounting plates
- Mounting plates
- Mounting plate TS
- Mounting bracket
- Mounting bracket
- Assembly components
- Snap-on nut TS
- Adaptor bracket TS
- Mounting bracket TS
- Mounting bracket PS
- Angle bracket PS
- Support bracket TS
- Support bracket PS
- Bracket/spacer
- Quick-assembly block
- Angle piece
- Frame connector piece
- T-connector piece
- Corner connector
- Universal bracket
- Cable retainer
- Mounting block
- U nuts
- Captive nuts/threaded blocks
- Spring nut M5
- Threaded inserts M6
- Multi-tooth screws
- Metal multi-tooth screws
- Self-tapping screws
- Self-tapping screws
- TS adaptor for wiring systems
- Kit
- Component shelves for frame attachment
- Component shelf for frame attachment
- Component shelf, pull-out
- Component shelf, static installation
- Drawer tray
- Component shelves for attachment to the 19˝ system punchings
- Component shelf, 482.6 mm (19˝) installation
- Component shelves for attachment to the 19˝ system punchings
- Component shelf, static installation
- Component shelf, pull-out
- Component shelf 1 U, static installation
- Component shelf 2 U, static installation
- Installation kit, depth-variable
- Installation kits/accessories for component shelves
- TS punched section with mounting flange, 17 x 73 mm
- Adaptor for L-shaped mounting angles
- Telescopic slides
- Accessories for component shelves
- Cable support
- Cable support
- Handles
- Fastening bolts
- System lights
- System lights
- Universal light
- Courtesy light
- Standard light
- Compact light
- Mounting kit magnet
- LED system light
- Light, 1 U
- Connection accessories
- Connection accessories
- EMC
- EMC side panels
- EMC baying seal
- EMC divider panel seal
- Rail
- EMC shielding bracket
- EMC gland plates
- EMC cable glands
- EMC shield bus
- EMC earth clamps
- Contact cutter
- Contact paint
- For areas at risk of earthquakes
- Earthquake kit
- Earthquake base/plinth
- Earthing
- Earth straps
- Earthing braid
- Assembly parts
- Assembly parts
- Contact washers
- Earthing plate
- Central earthing point
- Potential equalisation star
- Complete earthing kit
- Extension kit for complete earthing kit
- Earthing kit KE
- Earthing kit
- PE busbar
- Earth rail, horizontal
- Earthing kit, pre-assembled
- Earth rail, vertical
- Extension kit
- ESD connection point
- Busbars E-Cu
- Inserted screw nuts M12
- PE/PEN combination angle E-Cu
- Baying bracket E-Cu
- Cable management
- Cable entry
- Cable entry plates
- Cable entry grommets
- Connector grommets
- Section for cable entry, centre
- Section for cable entry, rear
- Foam rubber cable clamp strip
- EMC gland plates
- Gland plates
- Plastic cable gland plates
- Plastic cable gland plates
- Plastic gland plates
- Metal gland plates
- Metal gland plates
- Gland plate
- Gland plate
- Brush strip
- Brush strip, super-airtight
- Cable gland
- Cable gland, brass
- Cable gland, polyamide
- Cable gland HD
- Stainless steel lock nut
- Assembly tool
- Cable gland
- Connector gland
- Cable gland
- Edge protector
- Sealing frame
- Sealing modules
- Connector gland, small
- Cable gland module
- Stepped collar
- Cable duct
- Cable duct
- Aluminium rivet
- Cable clamp rails
- Cable clamps
- Cable clamp rails
- Cable clamping bracket
- Cable clamps
- Cable conduit and cable conduit holder
- Cable attachment
- Cable ties
- Nylon loop
- Nylon loop tape
- Nylon loop tape holders
- Nylon loop cable holder
- Snap-in cable routing
- Cable clamp rails
- Cable clamp rails, depth-variable
- Cable clamp, variable
- Cable manager
- Cable shunting ring
- Shunting ring
- Fibre-optic shunting rings
- System supports for cable routes
- Cable route
- Surplus cable holder
- 482.6 mm (19˝) cable management
- Cable routing bars
- Cable duct
- Cable finger 6 U
- 482.6 mm (19˝) drawer
- Cable management panel
- Cable management panel
- Cable management panel with cable routing bars
- Cable management panel, 2 U
- Cable routing channel
- Cable management panel, 2 U
- Cable management duct, horizontal
- Cable tray, 2 U
- Fibre-optic cable management panel, 1U
- Cable entry panel
- Cable routing across the 482.6 mm (19˝) level
- 482.6 mm (19˝) installation system
- Swing frames
- Swing frame, small
- Swing frame, large
- Swing frame, large
- Compact swing frame
- Swing frame stay
- Slide rails
- Accessories for Data Rack
- Second pair of mounting angles
- Baying clamp
- Depth stays
- Continuous slide rail
- Mounting angles
- Adaptor sections, 482.6 mm (19˝)
- Adaptor pieces, 482.6 mm (19˝)
- Adaptor sections, 482.6 mm (19˝)
- Infill panels, 482.6 mm (19˝), horizontal
- Mounting angles, 482.6 mm (19˝)
- Installation bracket TS
- TS punched section with mounting flange as installation kit
- Additional fastening attachment for mounting angles
- Mounting angles, 482.6 mm (19˝)
- Adhesive measurement strip, 482.6 mm (19˝)
- Slide rails
- Slide rails, static installation
- Slide rails, static installation
- Depth-variable slide rails
- Depth-variable slide rails, 1 U
- Slide rails
- Slide rails
- 482.6 mm (19˝) installation
- Server telescopic slides
- Mounting kit, 2 U
- Adaptor kit, 3 U
- Adaptor, 3 U
- Adaptor, metric to 21˝/19˝
- Drawer, 2 U, 3 U
- Installation kit
- Blanking plates, 482.6 mm (19˝)
- Hinge
- Ventilated front panels
- Air baffle plate
- Cover, magnetic
- Brush strip, vertical
- Mounting panel 482.6 mm (19˝), 2 U
- Support
- Captive nuts M5/M6
- Multi-tooth screws
- Assembly screws
- Front-mounting cage nut, 482.6 mm (19˝)
- Spring nuts with screws
- Patch panels
- Blanking panel, 482.6 mm (19˝)
- Blanking panel, 1 U
- Splicing boxes
- Fibre-optic splicing box, depth-variable
- Fibre-optic breakout box, 1 U
- Patch panels
- Fibre-optic splicing box with telescopic pull-out
- Patch panels
- Patch panels
- LSA connection system
- Support unit, 3 U
- Accommodation system, 2 U
- Handles
- Handle set
- Handle set
- Handle set
- TP aluminium strip
- Handles
- Corner handle
- U handle
- External mounting accessories
- Clipboard
- Display board
- Enclosure surface connector
- Front assembly
- Front panels
- Front panels
- Cover plate
- Mounting kit
- Mounting kit
- Monitors
- TFT monitor
- Power pack
- Connection cable
- Keyboards, supports and drawers
- TFT holder
- Keyboard, pull-out
- Built-in keyboard 482.6 mm (19˝)/4 U
- Fold-out tray
- Mousepad support, pull-out
- Support
- Utility bars, vertically hinged
- Drawer 482.6 mm (19˝)/2 U
- Drawer for keyboard and mouse
- Keyboard drawer, 1 U
- Keyboard drawer, 2 U
- Mousepad support
- Mousepad support, vertically hinged
- Mouse holder
- Paper removal flap
- Base
- Interfaces
- Interface extension with wall connection and built-in RJ 45 module
- Interface flaps, modular
- Signal pillars
- Signal pillars, LED compact
- Connection adaptor
- Signal pillars, modular
- Connection component
- Optical components
- Incandescent lamps
- Acoustic components
- Label panel
- Mounting components
- Mounting components
- Mounting components
- Technical information
- List of model numbers
- Index
- Rittal international
Catalogue 2014/2015
To see the actual publication please follow the link above