Control/regulation - Digital enclosure internal temperature display and thermostat - Digital enclosure internal temperature display and thermostat - Enclosure internal thermostat
Catalogue 2014/2015
Climate control accessories
Control/regulation
Digital enclosure internal temperature
display and thermostat
For installation in the enclosure door or wall.
Technical specifications:
– 2 voltage ranges for 100 – 230 V, 50/60 Hz
and 24 – 60 V (DC)
– Depth: 100 mm
– Three-digit, 7-segment display
– Option of switching between °C/°F
– Temperature range: +5°C…+55°C
– Includes 1800 mm long NTC sensor
– Two relay outputs as change-over contact and
normally open contact (max. contact load 230 V,
6 A)
– Freely selectable switching hysteresis
– The freely adjustable setpoint values can be set
using the membrane keyboard at the front,
setting range: +5°C…+55°C
– Display and switching accuracy ±2 K
– The minimum and maximum recorded temperatures
are stored until it is next reset
Packs of Model No.
1 pc(s). 3114.200
Colour:
– RAL 7035
Digital enclosure internal temperature
display and thermostat
Integrated into a patch panel 1 U
Including cable attachment for connection cable
and label holder.
Technical specifications:
– 2 voltage ranges for 100 – 230 V, 50/60 Hz
and 24 – 60 V (DC)
– Depth: 100 mm
– Three-digit, 7-segment display
– Option of switching between °C/°F
– Temperature range: +5°C…+55°C
– Includes 1800 mm long NTC sensor
– Two relay outputs as change-over contact and
normally open contact (max. contact load 230 V,
6 A)
– Freely selectable switching hysteresis
– The freely adjustable setpoint values can be set
using the membrane keyboard at the front,
setting range: +5°C…+55°C
– Display and switching accuracy ±2 K
– The minimum and maximum recorded temperatures
are stored until it is next reset
Packs of Model No.
1 pc(s). 7109.035
Colour:
– RAL 7035
Enclosure internal thermostat
Particularly suitable for controlling fan-and-filter
units, heaters and heat exchangers, this thermostat
can also be used as a signal generator for monitoring
the enclosure internal temperature.
Technical specifications:
– Bi-metal controller as a temperature-sensitive
element with thermal feedback
– Contact population: Single-pole change-over
contact as a quick-break contact
– Permissible contact load:
Category 5 – 3 (heating)
AC 10 (4)1) A,
DC = max. 30 W
Category 5 – 4 (cooling)
AC 5 (4)1) A,
DC = max. 30 W
1) = Inductive load at cos φ = 0.6
– Setting range: +5°C…+60°C
– Weight: approx. 105 g
– Dimensions: 71 x 71 x 33.5 mm
– Switching hysteresis: approx. 1 K ± 0.8 K
Rated operating voltage
V, ~ Model No.
230, 115, 1~, 60, 48, 24
3110.000
60/48/24 (DC)
– Flexible mounting on a vertical or horizontal
35 mm support rail to EN 50 022, and snapfastening
in the TS/SE enclosure section or on
the mounting plate using the supplied adaptor
Colour:
– RAL 7035
Accessories:
– Mounting plate TS with integral top-hat rail,
see page 617
– Bottom-mounted adaptor, see page 380
Rittal Catalogue 34/Climate control 379
- Catalogue 2014 /2015
- Index
- Enclosures
- Enclosure expertise
- Small enclosures
- Polycarbonate enclosures PK
- without knockouts
- without knockouts
- with knockouts
- Accessories
- Mounting plate
- Hinges
- Wall mounting brackets
- Cast aluminium enclosures GA
- Accessories
- Mounting plate
- Wall mounting bracket
- Hinge, exterior
- Terminal boxes KL
- without gland plate
- without gland plate
- with gland plate
- with gland plate
- E-Box EB
- Depth 80 mm
- Depth 120 mm
- Depth 155 mm
- Bus enclosures BG
- Compact enclosures
- Compact enclosures AE
- Features
- Order information
- Compact system enclosures CM
- Width 600 – 800 mm
- Width 1000 – 1200 mm
- Plastic enclosures KS
- Enclosure systems
- TS 8/SE 8 Features
- Baying systems TS 8
- Height 1200/1400 mm, depth 500 mm
- Height 1600 mm, depth 500 mm
- Height 1800 mm, depth 400 mm
- Height 1800 mm, depth 500 mm
- Height 1800 mm, depth 600 mm
- Height 2000 mm, depth 400 mm
- Height 2000 mm, depth 500 mm
- Height 2000 mm, depth 600 mm
- Height 2000 mm, depth 800 mm
- Height 2200 mm, depth 600 mm
- Electronic enclosures
- IP 66/NEMA 4
- Distribution enclosures
- Modular enclosures, height 2000 mm
- Modular enclosures, height 2200 mm
- Fuse-switch-disconnector enclosures
- Busbar enclosures
- EMC enclosures
- System enclosures SE 8
- Width 600 – 800 mm
- Width 1000 – 1800 mm
- IP 66/NEMA 4
- IT enclosure systems/housings
- Network/server enclosures TS-IT
- Features
- Order information
- with vented door for room climate control
- with vented door for room climate control
- with glazed door for rack climate control
- with glazed door for rack climate control
- with glazed door for rack climate control, pre-configured
- with glazed door for rack climate control, IP 55
- Distributor racks
- Data Rack
- IT enclosures
- VerticalBox
- FlatBox
- Design with 482.6 mm (19") mounting angles
- Design with 482.6 mm (19") mounting frame
- Wall-mounted enclosures EL, 3-part
- pre-configured with mounting angles, depth-variable
- with punched rails and mounting angles, depth-variable
- with mounting plate and mounting angles, static installation
- with mounting plate and mounting angles, static installation
- Wall-mounted enclosures AE
- with 482.6 mm (19") mounting angles, depth-variable
- Small fibre-optic distributors
- with mounting plate and splicing cassette accommodation
- Console systems/PC enclosure systems/Industrial Workstations
- TopConsole system TP
- Combination options
- 600 mm wide
- 800 mm wide
- 1200 mm wide
- 1600 mm wide
- Accessories
- Trim panel
- TP aluminium strip
- Drawer
- Desk section
- One-piece consoles TP
- Universal consoles TP
- PC enclosure systems
- Enclosure for tower PC
- Industrial Workstations
- Combination options
- IW enclosures and worktops
- Operating housings/support arm/stand systems
- Comfort Panel
- Configuration examples
- Optipanel
- Configuration examples
- Operating housing with handle strips
- Features
- Order information
- Operating housing for desktop TFT up to 24"
- Compact Panel
- Support arm systems
- Support arm system CP 40, steel
- Support section CP 40, steel
- Tilting adaptor +100/-60° for support arm connection ▭ 120 x 65 mm/▭ 90 x 71 mm
- Attachment CP 40, steel, for support arm connection ▭ 90 x 71 mm
- Coupling CP 40, steel, for support arm connection ▭ 90 x 71 mm
- Coupling CP 40, steel, for support arm connection ▭ 120 x 65 mm
- Connection console VESA 75/100 for support arm connection ▭ 120 x 65 mm
- Angle coupling 90° CP 40, steel, for support arm connection ▭ 90 x 71 mm
- Support section CP 40, steel
- Angle piece 90° CP 40, steel
- Top-mounted joint CP 40, steel
- Wall-mounted hinge CP 40, steel
- Wall/base mounting bracket, CP 40, steel
- Mounting component CP 40, steel, for signal pillar
- Accessories
- Support arm system CP 40, stainless steel
- Support section CP 40, stainless steel
- Tilting adaptor 10° CP 40, stainless steel
- Mounting bracket CP 40, stainless steel
- Coupling CP 40, stainless steel
- Support section CP 40, stainless steel
- Angle piece 90° CP 40, stainless steel
- Wall/base mounting bracket, rigid, CP 40, stainless steel
- Wall/base mounting bracket, swivel, CP 40, stainless steel
- Wall console CP 40, stainless steel
- Support arm system CP 60/120/180
- Support arm system CP 60
- Support section CP 60
- Tilting adaptor 10° for support arm connection
- Tilting adaptor +/-45°/tilting adaptor +100°/-60° for support arm connection
- Connection console VESA 75/100 for support arm connection
- Attachment CP 60/40 for support arm connection
- Coupling CP 60/40 for support arm connection
- Angle coupling 90° CP 60/40 for support arm connection
- Support section CP 60/40
- Angle adaptor 90° for support arm combination CP 60/40
- Angle piece 90°, CP 60
- Intermediate hinge CP 60
- Top-mounted joint CP 60
- Wall-mounted hinge CP 60
- Wall/base mounting bracket CP 60, small
- Wall/base mounting bracket CP 60, large
- Mounting component CP 60 for signal pillar
- Accessories
- Support arm system CP 120
- Support section CP 120
- Adaptor CP 120/60 from support arm connection Ø 130 mm to ▭ 120 x 65 mm
- Attachment CP 120/60 for support arm connection
- Coupling CP 120/60 for support arm connection
- Angle coupling 90° CP 120 for support arm connection
- Support section CP 120/60
- Adaptor for support arm combination CP 120/60
- Angle piece 90°, CP 120
- Intermediate hinge CP 120
- Top-mounted joint CP 120
- Wall-mounted hinge CP 120
- Wall/base mounting bracket CP 120, small
- Wall/base mounting bracket CP 120, large
- Mounting component CP 120/180 for signal pillar
- Tilting adaptor
- Accessories
- Support arm system CP 180
- Support section CP 180
- Attachment CP 120 for support arm connection Ø 130 mm
- Coupling CP 120 for support arm connection Ø 130 mm
- Support section CP 180/120
- Adaptor for support arm combination CP 180/120
- Angle piece 90° CP 180
- Intermediate hinge CP 180
- Top-mounted joint CP 180
- Wall-mounted hinge CP 180
- Wall/base mounting bracket CP 180, small
- Mounting component CP 120/180 for signal pillar
- Support arm system CP 40/60/120/180
- Connection console VESA 75/100
- Connection console
- Adaptor
- Adaptor
- Adaptor
- Connection plates
- Angle adaptor 90°
- Adaptor
- Adaptor CP 120 to support arm, height-adjustable
- Support arm, height adjustable
- Housing coupling
- Pivot
- Tilting adaptor +/–45°
- Tilting adaptor +100°/–60°
- Stand systems
- Pedestal, modular
- Pedestal, complete
- Pedestal, open/pillar, small
- Accessories
- Base mounting bracket
- Trim panel
- Enclosure reinforcement
- Hygienic Design
- Terminal boxes HD
- Compact enclosures HD
- Accessories
- Levelling feet HD
- Wall spacer bracket HD
- Enclosure key HD
- Bit HD
- Cam lock HD
- Rails for interior installation
- Stainless steel
- Switch housings
- Terminal boxes KL
- Bus enclosures BG
- Compact enclosures AE
- Compact enclosures AE
- Compact enclosures AE
- Baying systems TS 8
- IP 66/NEMA 4X
- System enclosures SE 8
- IP 66/NEMA 4X
- One-piece consoles
- PC enclosure systems
- Premium Panel IP 69K
- Command panel housings with door
- Ex enclosures
- Stainless steel, empty enclosure with screw-fastened cover
- Stainless steel, empty enclosure with hinged door
- Plastic, empty enclosure with hinged door
- Power distribution
- Power distribution expertise
- Busbar systems
- Mini-PLS
- Mini-PLS busbar system (40 mm)
- Mini-PLS fuse elements
- Mini-PLS component adaptor
- Rated current max. 12 – 25 A
- Rated current max. 40 – 100 A
- Allocation of switchgear – Mini-PLS component adaptors 12 A/25 A
- Allocation of switchgear – Mini-PLS component adaptors 40 A/100 A
- RiLine
- RiLine shrouded busbar systems up to 800 A (60 mm)
- Flat copper bar system
- Flat copper bar system
- RiLine shrouded busbar systems 800 A/1600 A (60 mm)
- PLS busbar system
- PLS busbar system
- Connection adaptors
- Rated current max. 63 – 125 A
- Rated current max. 250 – 600 A
- Rated current max. 800 – 1600 A
- Connection adaptor expansion set
- for 4-pole configuration
- OM adaptors
- Rated current max. 16 – 25 A, with connection cables
- Rated current max. 32 A, with connection cables
- Rated current max. 40 A, with connection cables
- Rated current max. 65 A, with connection cables
- Rated current max. 32 A, with tension spring clamp
- Rated current max. 65 A, with tension spring clamp
- Rated current max. 25 A, with plug-in cable outlet
- OM supports
- without contact system
- Circuit-breaker component adaptors
- Rated current max. 100 – 125 A, 3-pole
- Rated current max. 160 – 250 A, 3-pole
- Rated current max. 400 – 630 A, 3-pole
- Rated current max. 160 – 250 A, 4-pole
- Rated current max. 500 A, 4-pole
- OM adaptor with connection cables
- Allocation of switchgear
- Allocation of switchgear
- OM adaptor with tension spring clamps
- Allocation of switchgear
- Allocation of switchgear
- Bus-mounting fuse bases
- Bus-mounting fuse base D-Switch
- NH fuse-switch disconnectors, size 000
- Size 000, for mounting plate assembly
- Size 000
- NH fuse-switch disconnectors, size 00 to 3
- Size 00
- Size 1
- Size 2 – 3
- Size 00, with electronic fuse monitoring
- Size 1, with electronic fuse monitoring
- Size 2 – 3, with electronic fuse monitoring
- Size 00, with electromechanical fuse monitoring
- Size 1, with electromechanical fuse monitoring
- Size 2 – 3, with electromechanical fuse monitoring
- NH slimline fuse-switch disconnectors, size 00 to 3
- Size 00
- Size 00 – 3
- Size 00 – 3, with electronic fuse monitoring
- Fuse holder
- Rated operating current max. 30 – 60 A
- Rated operating current max. 100 – 400 A
- RiLine accessories
- Busbar supports/base isolators
- Busbar support
- Base isolators
- Spacers
- Busbars
- CUPONAL busbars
- Busbars E-Cu
- Busbar cover sections
- Inserted screw nuts M12
- PLS special busbars E-Cu
- Busbar connectors
- PLS busbar connectors
- PLS expansion connector
- Laminated copper bars
- Universal support
- Universal support
- Contact hazard protection
- System components
- Support panels
- Cross members
- Connection system
- Conductor connection clamps
- Plate clamps
- System covers
- Connection system/Mini-PLS component adaptors
- Connection block
- Insert strips
- Support rails 35 x 7.5 mm
- for OM adaptor/support
- Support rails 35 x 10 mm
- Support rails 35 x 15 mm
- Support rails 35 x 7.5 mm
- Insert strips
- Connection pin
- PinBlock
- PinBlock Plus
- Cable set
- Twin cords
- for circuit-breaker component adaptors
- Insert strips
- Sliding blocks
- Connection bracket
- Support rails 35 x 15 mm
- for bus-mounting fuse bases
- Contact hazard protection covers
- Covers, side
- Connection space extenders, side
- for NH fuse-switch disconn./NH slimline fuse-switch disconn.
- Box terminals
- Connection space covers
- Arc chambers
- Micro-switch
- for NH slimline fuse-switch disconnectors
- Connection space cover
- Clamp-type terminal connection
- Box terminals
- Busbar terminals
- Current converter
- Cable ties
- Ri4Power
- Busbar systems Maxi-PLS
- System components
- System components
- System components
- Busbar systems Flat-PLS
- System components
- System components
- System components
- Connection components for Maxi-PLS/Flat-PLS
- For open air circuit-breakers and busbar connections
- For open air circuit-breakers and busbar connections
- For open air circuit-breakers and busbar connections
- For open air circuit-breakers and busbar connections
- Busbar systems (100/185/150 mm)
- Busbar systems up to 1250 A (100 mm), 1600 A (185 mm), 2500 A (150 mm), 3000 A (150 mm)
- Connector kits for Maxi-PLS/Flat-PLS
- System accessories
- Screw connections
- Stacking insulator
- Support rails
- Stabiliser
- Cover systems
- Form 1
- Device module
- Contact hazard protection cover
- Contact hazard protection cover
- Mounting bracket
- Blanking covers
- Compartment configuration
- Form 1-4
- Compartment side panel modules
- Compartment side panel modules
- Gland plates
- Terminal box Form 4b
- Compartment divider
- Compartment divider
- Compartment divider
- Gland plates
- Air circuit-breaker support rails
- Mounting bracket
- Mounting bracket
- Mounting kit
- Partial mounting plates
- Support frame
- Coupling set mounting kit
- Ri4Power accessories
- Busbar system
- System attachments
- Distribution busbars
- Spacer rolls
- Fuse-switch disconnector section
- Front trim panels
- Assembly kit
- Divider panels
- Dividing plates
- Contact hazard protection cover
- Cover
- Punched rail
- Cover
- Busbar support
- End support
- Distribution busbars
- Terminal block
- Software/documentation
- Rittal Power Engineering
- Assembly instructions for Ri4Power low-voltage switchgear
- Ri4Power ISV distribution enclosures
- Mounting kits
- Mounting kits
- Mounting kits
- Installation modules
- Contact hazard protection modules
- Mounting plate modules
- Support rail modules
- DIN rail mounted device modules
- Connection terminal blocks
- NH fuse-switch disconnector modules
- Disconnector cross-member
- NH slimline fuse-switch- disconnector modules
- Air circuit-breaker modules
- Meter mounting board module
- Busbar modules N/PE
- Busbar modules
- Accessories
- Cover strips
- Blanking cover
- Blanking cover
- Wiring brackets
- Depth extension frame
- Cross rails
- Mounting angles
- Mounting angles
- Depth stay
- Equipment support connector
- Climate control
- Experts in climate control
- Cooling with ambient air
- TopTherm fan-and-filter units
- Air throughput 20 – 55 m³/h
- Air throughput 105 – 180 m³/h
- Air throughput 230 – 550 m³/h
- Air throughput 700 m³/h
- Air throughput 55 – 230 m³/h, with EC technology
- Air throughput 550 – 900 m³/h, with EC technology
- Air throughput 20 – 180 m³/h, EMC
- Air throughput 230 – 900 m³/h, EMC
- Air throughput and protection category
- TopTherm fan-and-filter units
- TopTherm fan-and-filter units with EC technology
- TopTherm fan-and-filter units, EMC
- TopTherm roof-mounted fans
- Air throughput 400 – 800 m³/h
- Roof-mounted fans, roof ventilation
- Air throughput 360 m³/h
- Rack-mounted fans for 482.6 mm (19")
- Air throughput 320 – 480 m³/h
- Vario rack-mounted fans for 482.6 mm (19")
- Air throughput 320 – 480 m³/h
- Tangential fans for 482.6 mm (19")
- Air throughput 320 m³/h
- TopTherm air/air heat exchangers
- Specific thermal output 17.5 – 90 W/K, wall-mounted with controller
- Air/air heat exchangers
- Specific thermal output 66 W/K, roof-mounted
- Cooling units
- Thermoelectric coolers
- Total cooling output/heating output 100 W
- TopTherm wall-mounted cooling units, horizontal format
- Output class 300 W
- TopTherm wall-mounted cooling units
- Output class 300 W
- TopTherm wall-mounted cooling units "Blue e"
- Output class 500 W
- Output class 750 W
- Output class 1000 W
- Output class 1500 W
- Output class 2000 W
- Output class 2500 W
- Output class 4000 W
- TopTherm wall-mounted cooling units "Blue e", slimline
- Output class 1500 W
- TopTherm wall-mounted cooling units "Blue e", NEMA 4X
- Output class 500 – 1500 W
- Output class 2000 – 2500 W
- TopTherm roof-mounted cooling units "Blue e"
- Output class 500 W
- Output class 750 W
- Output class 1000 W
- Output class 1100 – 1500 W
- Output class 2000 W
- Output class 3000 – 4000 W
- Modular climate control concept - Cooling module "Blue e"
- Output class 1500 – 2500 W
- Modular climate control concept - Section doors
- for installing cooling modules
- Cooling with water
- Air/water heat exchangers
- Output class 300 – 500 W, wall-mounted
- Output class 600 – 1000 W, wall-mounted
- Output class 1250 – 3000 W, wall-mounted
- Output class 3000 – 5000 W, wall-mounted
- Output class 7000 W, wall-mounted
- Output class 1875 – 4000 W, roof-mounted
- Liquid Cooling Package
- Output class 10 kW, LCP Rack Industry
- TopTherm chillers
- Output class 1000 – 1500 W
- Output class 3000 – 6000 W
- Output class 1000 – 2500 W, wall-mounted
- Output class 8000 – 16000 W
- Output class 20000 – 40000 W
- Enclosure heaters
- Continuous thermal output 235 – 800 W, with fan
- Continuous thermal output 10 – 150 W, without fan
- Climate control accessories
- Filter technology
- Filter mats
- Filter mats
- Metal filter
- Spare filter mats
- Fine filter mats
- Outlet filter
- Hose-proof hood
- Blanking cover
- Front outlet grille 2 U
- Filter holder
- Enclosure internal fans
- Mini-fan
- Integrated louvres
- Air routing
- Air duct system
- Air duct adaptor
- Deflector, 90°
- Flat air duct system
- Flat duct extension
- Stoppers
- Air diverter
- Water distribution
- Electric condensate evaporator
- Condensate collecting bottle
- Condensate hose
- Flow regulator valve
- Fitting G⅜˝
- Cooling medium
- Control/regulation
- Digital enclosure internal temperature display and thermostat
- Digital enclosure internal temperature display and thermostat
- Enclosure internal thermostat
- Hygrostat
- Bottom-mounted adaptor
- Speed control EC
- Speed control EC
- Speed control
- Interface board
- SK BUS system
- SK BUS system
- Toroidal transformer
- Mounting
- Roof plates TS
- Vent attachment TS
- Trim frame
- Quick-change frame
- Guide frame
- Project planning/monitoring
- Therm software
- RiDiag II
- IT infrastructure
- IT infrastructure expertise
- RiMatrix S
- RiMatrix S at a glance
- Standard room
- Standard security room
- Standard container
- RiMatrix S Selector
- RiMatrix S App
- IT enclosure systems/housings
- IT power
- Power Distribution Rack
- Power Distribution Rack PDR
- Power Distribution Module PDM
- Power System Module
- PSM busbars
- PSM busbars + PSM socket modules
- PSM busbars
- PSM measurement bar
- PSM measurement bar for CMC III
- PSM socket modules
- PSM socket modules
- PCU Power Control Unit
- Power Control Unit (PCU)
- Accessories
- Mounting kit
- Connection cable
- Cable lock PSM
- Overvoltage protection PSM
- Power Distribution Unit
- Features
- Order information
- PDU international, basic version
- PDU international, metered version
- PDU international, switched version
- PDU international, managed version
- Slave PDU international, managed version
- PDU UK, basic version
- PDU UK, metered version
- PDU UK, switched version
- PDU UK, managed version
- Slave PDU UK, managed version
- PDU accessories
- CMC III sensors (max. 4 sensors per PDU)
- Configuration
- Sample applications
- Power System Module
- MID measurement module for CMC III
- Power supply
- Socket strips
- Socket strips
- Socket strip
- Socket strip
- Junction box
- Socket
- Service socket
- Energy-Box, 3 U, 482.6 mm (19˝)
- Energy-Box, 3 U, 482.6 mm (19˝)
- IT cooling
- Liquid Cooling Package
- LCP Rack CW
- LCP Inline CW
- LCP T3+ CW
- LCP Rack DX
- LCP Inline DX
- Accessories for LCP CW/DX
- Touchscreen display
- Condenser unit
- Vertical shielding
- Connection hose
- Rear adaptor
- Add-on cover
- SNMP card
- Fan module
- Aisle containment
- Roof-mounted cooling units
- for cooling IT equipment
- Small cooling units
- Roof-mounted fans
- Fan mounting plate
- Fan mounting plate
- Fan expansion kit
- Fan cross member
- Fan expansion kit
- Cover plates for fan panels
- Vent cover
- Chillers for IT cooling
- Total cooling output 15 – 67 kW
- Total cooling output 77 – 124 kW
- Total cooling output 155 – 261 kW
- Total cooling output 291 – 481 kW
- IT monitoring
- CMC III – Monitoring system
- CMC III Processing Unit Compact
- System overview
- CMC III Processing Unit
- System overview
- CMC III Processing Unit/Compact
- Sensors/accessories
- Control units for CMC III Processing Unit
- CMC III sensors for direct connection
- Interface for CMC II sensors
- Accessories
- Access system
- Interface for PSM, PCU
- PSM and slave PDU for direct connection
- CMC III control units/ CMC III sensors
- Interface for CMC III sensors
- Access system
- Interface for PSM, PCU
- Power supply unit
- Programming cable
- CAN bus connection cable
- Connection cable/extension
- Extension cable RJ 12
- Mounting unit, 1 U
- Cable clamp strap
- Mounting unit
- Door control system
- Door control system
- Accessories
- Door control module
- Door kit
- Door comfort handle
- Door switch
- Monitor/keyboard unit
- Monitor/keyboard unit, 1 U
- KVM switch
- Dynamic Rack Control
- Accessories
- RFID aerial
- RFID tags
- RFID controller
- CMC III CAN bus DRC
- IT management software
- RiZone Appliance Standard
- RiZone Appliance IP node licence
- Server shutdown software
- IT security solutions
- Micro Data Centre
- Level E
- Level B
- Level A
- Compact split cooling solution
- Outdoor split cooling solution
- Split outdoor cooling solution with inverter technology
- Data Centre Container
- Fire alarm and extinguisher system DET-AC/EFD Plus
- Security rooms
- Software & services
- next level for industry
- Planning and project management
- Design – Calculation – Verification
- System technology and components
- Virtual enclosure layout
- Enclosure machining
- Documentation
- Benefits of the value chain
- Tools/CAD data
- RiCAD 3D
- AE Laser Express
- Therm software
- Rittal Power Engineering
- Configurators
- Enclosures
- TS 8 configurator
- CM configurator
- Human/machine interface
- Command panel configurators
- Support arm configurator
- IT management software
- DCIM – Data Center Infrastructure Management
- Service – Global availability
- Services
- Quality management
- System accessories
- Flex-Block base/plinth system
- Base/plinth
- Flex-Block base/plinth system
- Flex-Block corner pieces
- Flex-Block trim panels
- Baying clip
- Base/plinth TS
- Base/plinth components front and rear
- Base/plinth trim panels, side
- Base/plinth baying brackets
- Cable chamber
- Side panels
- Transport castors
- Base mounting plate
- Fastening bolts
- Levelling component
- Cover cap
- Base/plinth, stationary
- Filter mat
- Base/plinth components front and rear
- Base/plinth trim panels, side
- Base/plinth trim, modular
- Base/plinth
- Base/plinth, complete
- Base/plinth, complete
- Cast feet
- Levelling feet
- Cross member
- Stabiliser
- Base
- Base
- Levelling feet
- Levelling feet
- Levelling feet
- Twin castors
- Transport kit
- Adaptor sleeve
- Base/plinth adaptor
- Base/plinth adaptor
- Width divider
- Reinforcement bracket
- Base mount
- Clips
- Gland plate
- For enclosure depth 300 mm, complete module groups
- For enclosure depth 400 mm, complete module groups
- For enclosure depth 500 mm, complete module groups
- For enclosure depth 600 mm
- For enclosure depth 800 mm
- For enclosure depth 1000 mm
- For enclosure depth 1200 mm
- Trim panel
- Gland plate module, vented
- Gland plate module, one-piece, with brush strip
- Gland plate module, two-piece, with brush strip
- Gland plate module for side cable entry
- Pressure relief stoppers
- Condensate discharge
- Walls
- Side panels
- Side panels, screw-fastened, sheet steel
- Side panels, screw-fastened, stainless steel
- Baying frame, IP 66/NEMA 4, NEMA 4X
- Enclosure panel holders, internal
- Hinges
- Side panel, divided
- Side panel, lockable
- Internal latch
- Paint
- Divider panels/partitions
- Divider panel
- Partition
- Divider panel
- Module plates
- Adaptor
- Cover plate
- Cover with door
- Isolator door locking
- TS isolator door cover (US version)
- Door latch for bayed enclosure suites
- Baying system
- Enclosure suites
- Quick-fit baying clamp, one-piece
- Quick-fit baying clamp, three-piece
- Baying clamp, horizontal
- Baying clamp, vertical
- Baying clamp, vertical
- Baying connector, external
- Angular baying bracket
- Baying brackets
- Angular baying brackets
- Combination angle
- Baying attachment, vertical
- Baying attachment, vertical
- Baying cover, vertical
- Baying clamp, horizontal
- Baying cover, top
- Baying connector, external
- Baying kit
- Doors/locks
- Door variants
- Tubular door frame
- Glazed door
- Handle adaptor
- Lock components
- Glazed door, vented
- Lockable and adjacent door
- Protective bars
- Holder
- Variable modular climate control concept
- Installation accessories for modular front design TS
- Partial doors
- Perforated mounting strips
- Front trim panels, top
- Front trim panels, bottom
- Trim panel, hinged at the top
- Drawer
- Stay
- Upgrade kit IP 4X
- Wiring trim panel
- Viewing panels/operating panels
- System window
- Viewing window
- Horizontally hinged FT stay
- Acrylic glazed cover
- Viewing window
- Monitor frame
- Identification strips
- Operating panel
- Cam lock
- Viewing window
- Allocation of lock systems
- Compact enclosures, sheet steel
- Large enclosures, sheet steel
- Console systems and industrial workstation, sheet steel
- Enclosures and cases, stainless steel
- Lock systems
- Comfort handle
- Lock inserts
- Folding lever handle
- Comfort handle
- Adjacent door latch
- Locking bar latch to CNOMO¹⁾
- Spring washer
- Mini-comfort handle
- Ergoform S lock system
- Plastic handles
- T-handles
- Cam locks
- Lock inserts
- Lock cylinder inserts
- Semi-cylinder lock
- Lock cover
- Multiple lock
- Lock cover
- Security lock
- Enclosure keys
- Hinges
- 130°/180° hinges
- Hinge pin removal tool
- Cover hinge
- Cover retainer
- Door, internal
- Support strips
- Spacers
- Perforated mounting strip
- Utility lectern
- Wiring plan lectern
- CD/DVD box
- Plastic wiring plan pockets
- Plastic wiring plan pockets
- Wiring plan pockets with transparent pouch
- Sheet steel wiring plan pockets
- Door stay
- Door stay for escape routes
- Ride-up roller
- Transport and mounting handle
- Document clip, magnetic
- Alternate frame, magnetic
- Roof/wall mounting
- Roof
- Rain canopies
- Dust guard trim
- Dust guard trim
- Top-mounting module
- Side panel
- Roof plates
- Cable entry gland
- Roof plate
- Roof plate, vented
- Roof mounting screw
- Spacers
- Eyebolts
- Eyebolts
- Eyebolts
- Wall mounting
- Wall mounting bracket
- Wall mounting bracket
- Wall mounting bracket
- Wall mounting bracket
- Wall angle
- Wall bracket
- Pole clamp
- Enclosure connectors
- Frame connector, adjustable
- Wall mounting bracket
- Interior installation
- Mounting plates
- Mounting plates
- Mounting plate
- Mounting plate infill
- Mounting plate attachment
- Mounting plate attachment
- Installation kit
- Slide rails
- Mounting plate adjustment bracket
- Mounting plate attachment
- Cross-brace for mounting plates
- Transport handles for mounting plates
- Partial mounting plates
- Hinge attachment
- Partial mounting plates, locatable into rails
- Rail systems
- Installation examples
- AE installation examples with TS system rails
- CM installation examples with TS system rails
- TP pedestal/one-piece console Installation examples with TS system rails
- TP console Installation examples with TS system rails
- TS/SE installation examples with TS system rails
- TS/SE installation examples with TS system rails
- TS/SE installation examples with TS system rails
- Rails for interior installation
- Rails for interior installation
- TS punched section with mounting flange, 17 x 73 mm
- Attachment TS
- TS punched section with mounting flange, 17 x 73 mm
- TS punched section with mounting flange, 23 x 73 mm
- TS punched sections without mounting flanges 45 x 88 mm
- TS punched rail 25 x 38 mm
- Base configuration rail
- TS punched rail 18 x 38 mm
- TS support strips
- TS assembly block
- Adaptor rail
- PS punched rails 23 x 23 mm
- Punched rail 23 x 23 mm
- PS punched section without mounting flange 23 x 73 mm
- PS punched section with mounting flange, 23 x 73 mm
- C rails 30/15
- C rails
- System support rails
- Support rails
- Support rail 65 x 42 mm
- Support rails TS 35/15
- Support rails TS 35/7.5 and TS 35/15
- Support rails
- Mounting clip
- TS punched rail 17 x 17 mm
- C rails
- Punched sections with mounting flanges
- Mounting plates
- Mounting plates
- Mounting plates
- Mounting plate TS
- Mounting bracket
- Mounting bracket
- Assembly components
- Snap-on nut TS
- Adaptor bracket TS
- Mounting bracket TS
- Mounting bracket PS
- Angle bracket PS
- Support bracket TS
- Support bracket PS
- Bracket/spacer
- Quick-assembly block
- Angle piece
- Frame connector piece
- T-connector piece
- Corner connector
- Universal bracket
- Cable retainer
- Mounting block
- U nuts
- Captive nuts/threaded blocks
- Spring nut M5
- Threaded inserts M6
- Multi-tooth screws
- Metal multi-tooth screws
- Self-tapping screws
- Self-tapping screws
- TS adaptor for wiring systems
- Kit
- Component shelves for frame attachment
- Component shelf for frame attachment
- Component shelf, pull-out
- Component shelf, static installation
- Drawer tray
- Component shelves for attachment to the 19˝ system punchings
- Component shelf, 482.6 mm (19˝) installation
- Component shelves for attachment to the 19˝ system punchings
- Component shelf, static installation
- Component shelf, pull-out
- Component shelf 1 U, static installation
- Component shelf 2 U, static installation
- Installation kit, depth-variable
- Installation kits/accessories for component shelves
- TS punched section with mounting flange, 17 x 73 mm
- Adaptor for L-shaped mounting angles
- Telescopic slides
- Accessories for component shelves
- Cable support
- Cable support
- Handles
- Fastening bolts
- System lights
- System lights
- Universal light
- Courtesy light
- Standard light
- Compact light
- Mounting kit magnet
- LED system light
- Light, 1 U
- Connection accessories
- Connection accessories
- EMC
- EMC side panels
- EMC baying seal
- EMC divider panel seal
- Rail
- EMC shielding bracket
- EMC gland plates
- EMC cable glands
- EMC shield bus
- EMC earth clamps
- Contact cutter
- Contact paint
- For areas at risk of earthquakes
- Earthquake kit
- Earthquake base/plinth
- Earthing
- Earth straps
- Earthing braid
- Assembly parts
- Assembly parts
- Contact washers
- Earthing plate
- Central earthing point
- Potential equalisation star
- Complete earthing kit
- Extension kit for complete earthing kit
- Earthing kit KE
- Earthing kit
- PE busbar
- Earth rail, horizontal
- Earthing kit, pre-assembled
- Earth rail, vertical
- Extension kit
- ESD connection point
- Busbars E-Cu
- Inserted screw nuts M12
- PE/PEN combination angle E-Cu
- Baying bracket E-Cu
- Cable management
- Cable entry
- Cable entry plates
- Cable entry grommets
- Connector grommets
- Section for cable entry, centre
- Section for cable entry, rear
- Foam rubber cable clamp strip
- EMC gland plates
- Gland plates
- Plastic cable gland plates
- Plastic cable gland plates
- Plastic gland plates
- Metal gland plates
- Metal gland plates
- Gland plate
- Gland plate
- Brush strip
- Brush strip, super-airtight
- Cable gland
- Cable gland, brass
- Cable gland, polyamide
- Cable gland HD
- Stainless steel lock nut
- Assembly tool
- Cable gland
- Connector gland
- Cable gland
- Edge protector
- Sealing frame
- Sealing modules
- Connector gland, small
- Cable gland module
- Stepped collar
- Cable duct
- Cable duct
- Aluminium rivet
- Cable clamp rails
- Cable clamps
- Cable clamp rails
- Cable clamping bracket
- Cable clamps
- Cable conduit and cable conduit holder
- Cable attachment
- Cable ties
- Nylon loop
- Nylon loop tape
- Nylon loop tape holders
- Nylon loop cable holder
- Snap-in cable routing
- Cable clamp rails
- Cable clamp rails, depth-variable
- Cable clamp, variable
- Cable manager
- Cable shunting ring
- Shunting ring
- Fibre-optic shunting rings
- System supports for cable routes
- Cable route
- Surplus cable holder
- 482.6 mm (19˝) cable management
- Cable routing bars
- Cable duct
- Cable finger 6 U
- 482.6 mm (19˝) drawer
- Cable management panel
- Cable management panel
- Cable management panel with cable routing bars
- Cable management panel, 2 U
- Cable routing channel
- Cable management panel, 2 U
- Cable management duct, horizontal
- Cable tray, 2 U
- Fibre-optic cable management panel, 1U
- Cable entry panel
- Cable routing across the 482.6 mm (19˝) level
- 482.6 mm (19˝) installation system
- Swing frames
- Swing frame, small
- Swing frame, large
- Swing frame, large
- Compact swing frame
- Swing frame stay
- Slide rails
- Accessories for Data Rack
- Second pair of mounting angles
- Baying clamp
- Depth stays
- Continuous slide rail
- Mounting angles
- Adaptor sections, 482.6 mm (19˝)
- Adaptor pieces, 482.6 mm (19˝)
- Adaptor sections, 482.6 mm (19˝)
- Infill panels, 482.6 mm (19˝), horizontal
- Mounting angles, 482.6 mm (19˝)
- Installation bracket TS
- TS punched section with mounting flange as installation kit
- Additional fastening attachment for mounting angles
- Mounting angles, 482.6 mm (19˝)
- Adhesive measurement strip, 482.6 mm (19˝)
- Slide rails
- Slide rails, static installation
- Slide rails, static installation
- Depth-variable slide rails
- Depth-variable slide rails, 1 U
- Slide rails
- Slide rails
- 482.6 mm (19˝) installation
- Server telescopic slides
- Mounting kit, 2 U
- Adaptor kit, 3 U
- Adaptor, 3 U
- Adaptor, metric to 21˝/19˝
- Drawer, 2 U, 3 U
- Installation kit
- Blanking plates, 482.6 mm (19˝)
- Hinge
- Ventilated front panels
- Air baffle plate
- Cover, magnetic
- Brush strip, vertical
- Mounting panel 482.6 mm (19˝), 2 U
- Support
- Captive nuts M5/M6
- Multi-tooth screws
- Assembly screws
- Front-mounting cage nut, 482.6 mm (19˝)
- Spring nuts with screws
- Patch panels
- Blanking panel, 482.6 mm (19˝)
- Blanking panel, 1 U
- Splicing boxes
- Fibre-optic splicing box, depth-variable
- Fibre-optic breakout box, 1 U
- Patch panels
- Fibre-optic splicing box with telescopic pull-out
- Patch panels
- Patch panels
- LSA connection system
- Support unit, 3 U
- Accommodation system, 2 U
- Handles
- Handle set
- Handle set
- Handle set
- TP aluminium strip
- Handles
- Corner handle
- U handle
- External mounting accessories
- Clipboard
- Display board
- Enclosure surface connector
- Front assembly
- Front panels
- Front panels
- Cover plate
- Mounting kit
- Mounting kit
- Monitors
- TFT monitor
- Power pack
- Connection cable
- Keyboards, supports and drawers
- TFT holder
- Keyboard, pull-out
- Built-in keyboard 482.6 mm (19˝)/4 U
- Fold-out tray
- Mousepad support, pull-out
- Support
- Utility bars, vertically hinged
- Drawer 482.6 mm (19˝)/2 U
- Drawer for keyboard and mouse
- Keyboard drawer, 1 U
- Keyboard drawer, 2 U
- Mousepad support
- Mousepad support, vertically hinged
- Mouse holder
- Paper removal flap
- Base
- Interfaces
- Interface extension with wall connection and built-in RJ 45 module
- Interface flaps, modular
- Signal pillars
- Signal pillars, LED compact
- Connection adaptor
- Signal pillars, modular
- Connection component
- Optical components
- Incandescent lamps
- Acoustic components
- Label panel
- Mounting components
- Mounting components
- Mounting components
- Technical information
- List of model numbers
- Index
- Rittal international
Catalogue 2014/2015
To see the actual publication please follow the link above