|Description||Approbation||Accessories||Downloads||CAD||Text for tenders|
Download als .txt-Datei »
DK-TS 8 Network enclosure
The symmetrical extrusion frame construction of the
network enclosure consists of rolled 16-fold vertical
hollow sections with holes on a 25 mm DIN pitch
pattern. Integral system punching in the frame section
allows simple fitting and securing of equipment
according to the plug-and-play technique. All sections
have chamfered edges.
The vertical frame sections have two depth-recessed
mounting levels each, that can individually be used
for flexible attachment of the installation components
or together as basis for a double-walled population,
the created interior space can be used, for example,
for insulation and climate control purposes.
The horizontal 9-fold sections are provided with an
additional protection lip above the seal.
Enclosures are bayable on all sides: on the left,
right, front, rear, at the top or round corners.
Glazed designer front door made from extruded
aluminium section and 3 mm single-pane safety
Door opening angle with stand-alone siting 180° at
least. Including comfort handle for semi-cylinder
Rear door of 2 mm sheet steel, with foamed-in seal,
with removable rectangular frame with holes on a
25 mm DIN pitch pattern, locking bar with 4-point
latching, swing handle with security lock 3524 E.
Hinges with captive hinge pins. Door hinging may
be swapped from right to left without dismantling
locking rods, door opening angle 130°.
Two punched sections with mounting flanges, fitted in
the inner mounting level and both are secured by a
Removable roof plate, with foamed-in seal and
screw-fastened by 4 assembly screws.
3-piece gland plate including sliding plate for
cable entry. The separate plates can be fitted in any
order. In addition the individual modules can be
exchanged for already populated fan modules or modules
with brush strips for cable entry.
All screw-fastened panels have automatic potential
equalisation and are prepared for attachment of
Material: Sheet steel
Dimensions: W.: 800 mm H.: 2000 mm D.: 800 mm
|Unsere Kunden interessierten sich auch für:|